About this item DB15 to Green Type 2 SAE J1939 Male and Female Splitter Y Cable for Truck Freightliner ELD Device. DB15 female to SAE J1939 male and SAE J1939 female. The length is 2 meters / 6 feet. Cable includes one SAE J1939 male connector, one SAE J1939 female…
Posts tagged as “SAE J1939”
About this item Green Type-2 J1939 Male to Female to OBD-II Splitter Cable. This cable turns Type-2 J1939 connector to one Type-2 J1939 female connector and one OBD-II female port. This cable will enable you to operate a combination of SAE J1939 and OBD2 devices. The cable is 20 AWG…
About this item SAE J1939 to SAE J1962 Adapter. This adapter converts a green SAE J1939 connector port to an ODB-II female connector. Both the J1939 and OBD-II connectors are industrial strength. This adapter is used for ELD device & GPS tracker and data scanning devices. Order information… A Comprehensible…
Please be aware that you can only scan the network when you have chosen ECU Simulation Mode in the ECU Setup tab. Otherwise, the software will indicate that there is no node ID available. Click on the Scan Network command button, and the system will send a Request for Address Claimed message into the network. All other…
The Recorder function allows the user to store received (filtered) PGNs into an MS-Excel-compatible csv file. The control buttons are self-explanatory, since they resemble those of any standard recording device. Click Record to start the recording process, and the program will display the number of current records as shown above. After clicking the Stop button,…
In the Byte Data section of the jCOM1939Monitor software, the user can select a previously designed PGN, the data start position, and the data length (1, 2, 3, or 4 bytes). The program will display the data as selected and allows the user to modify the data either per text input or…
The Bit Data section was designed with the modification of digital signals in mind. It functions very similar to the Byte Data section, however, limited to one byte. Also, instead of a slider, the program uses check boxes to set or reset digital information. → Download/View the JCOM1939 Monitor User Manual (PDF)… A Comprehensible…
If your intention is the mere monitoring of SAE J1939 data traffic, you don’t need to set up the ECU, but if you want to transmit SAE J1939 data (PGNs), you need to claim a node address. This section is where you configure an SAE J1939 ECU through parameters such…
The Filter section allows you to filter any PGNs (Parameter Group Numbers) from your network. Simply enter the PGN of your choice and a description (optional), then hit the Save command button. The PGN, provided it is part of your J1939 data traffic will show on the data screen below. If you…
Please be aware that you can only transmit messages when you have chosen ECU Simulation Mode in the ECU Setup tab and you have claimed an ECU address (see paragraph ECU Setup above). Otherwise, the software will indicate that there is no node ID available. You can design messages by entering the PGN, Destination Address (255…
